STOPPER For Audi S3/RS3 8y 2020 to 2023. Blocker Switchable Mode Can Filter Tool.

MILEAGE BLOCKER FOR AUDI S3/RS3 - 8Y

Easy DIY installation

Plug-in face and ridges on the connector ensure a smooth installation process

Easy to use with multiple key combinations

Leaves no trace when you remove it: no soldering or cutting of wires required

No error messages on the speedometer or navigation panel

Comes with premium-quality plugs and heat-resistant cables

Chosen settings are saved unconditionally

After detaching the module, the mileage doesn’t increase spontaneously

Speedometer and all other assistance systems work properly

As soon as this device is active, the engine control light can come on for vehicles from the end of 2020-2023

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

Function

ACTIVATION & DEACTIVATION

Press the OK button for 10 seconds.

Repeat the process to switch from mode to mode.

The speed display and the assistance systems operate smoothly in all modes.

Mode 1

The kilometers are stopped at 100%

In this mode, when you exceed 40 km/h, the speedometer will not work anymore. To use this option, you have to activate Mode 1 and park/turn off the car for 2 minutes.

Mode 2

Only 20 % of the actual mileage is recorded

The speedometer and all other assistance systems work flawlessly

Mode 3

Only 30% of the actual mileage is recorded

The speedometer and all other assistance systems work flawlessly

Mode 4

100% of the actual mileage is recorded

The device is switched off.

Audi S3, RS3, 8Y mileage blocker can be activated or deactivated at any time, whether the vehicle is in motion or stationary.

FAQ

What happens if I remover the module again?

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

The engine control light lights up in my seedometer?

As soon as this device is active and the mileage is stopped or slowed down, the engine control light can come on for vehicles from the end of 2020-2023. As soon as this device is switched off, the engine control lamp goes out again after a few vehicle movements. While we stop or slow down the mileage, we are manipulating some messages. These messages are not transmitted and the engine check can be activated. This is a sporadic error and there are no errors in the vehicle, engine or transmission. This error can also be deleted at any time with a universal diagnostic device.